LED Streetlights and Outdoor Area Lighting

Outdoor Area LED Fixtures and Streetlights

Relume - Streetlighting

SPECIFICATIONS:
RELUME HIGH OUTPUT LED STREET LIGHT products are cut-off rated LED luminaires. The units are designed for maximum thermal dissipation of heat away from the LEDs. Limiting the temperature rise of the LED at the mounting position to under 45˚F (25˚C) during continuous operating conditions, insures projected life and luminous output.

LED LIGHT COLOR/ QUALITY:
The HIGH OUTPUT LEDs range from 6,500 to 7,500 (cool) on the Kelvin temperature scale and are rated for a minimum of 70,000 hours of continuous operation at ambient temperatures from -40˚F (-40˚C) to 122˚F (+50˚C).

ELECTRICAL:
Each power supply (driver) is UL class 2 compliant operating from a 60 HZ +/-3 HZ AC line over a voltage ranging from 95 volts to 280 volts. Each driver is an efficient switcher with a power factor of greater than 0.91 with an input current Total Harmonic Distortion (THD) of less than 20%. Fluctuations of the line voltage have no visible effect on the luminous output. Each driver includes voltage surge protection to withstand high repetition noise transients while meeting emission limits as set forth by the FCC Title 47, Subpart B, Section 15.

TERMINAL BLOCKS AND WIRING:
All wiring and terminal blocks conform to requirements set forth in Section 13.02 of the ITE Publication: Equipment and Material Standards, Chapter 2 (Vehicle Traffic Control Signal Heads).

LED LIGHT ENGINE CONSTRUCTION:
The RELUME HIGH OUTPUT LED LIGHT panel consists of a circuit board comprised of an insulated aluminum substrate with a minimum thickness of 0.080 inch. Circuit conductors and LED attachment adhesive is no less than 90% pure silver to insure optimal electrical and thermal conductivity. The complete face of the LED Light engine panel is conformally coated with a 2 part UV stabilized urethane resin, no thinner than 0.002 inch (dry) to adequately protect the light engine from moisture and corrosion meeting GM4901 paint specifications.

HOUSING:
Aircraft-quality 6061 Aluminum is extruded to form the skeletal structure and thermal dissipation sink all in one. The unit is then capped with a Thermo Plastic Olefin (TPO) polymer thermo formed solar shield, limiting solar heating and preventing thermal degradation of the LED light engine. The solar shield is attached with push pin latches to provide easy tool-less access to the luminaires.

LENSES:
Each LED module is protected by a high impact, UV stabilized, sealed, and non-yellowing acrylic lens sealed into place using a high-bond adhesive gasket, providing unobstructed visibility while protecting against moisture, dust, insects, vandals, and storm damage while allowing for a neighborhood friendly, closely-defined optical beam pattern.

ENVIRONMENTAL: All RELUME LIGHT engines fully comply with the Restriction of Hazardous Substances Directive (RoHS) adopted in February 2003 by the European Union.

QUALITY ASSURANCE:
All RELUME LIGHT engines have been independently tested and passed FDOT environmental test A615-2, A615-3, A615-4, A615-5, A615-6, A615-7, UL, and FCC regulations. In production, each light engine panel is burned-in for a 8 hour period and certified for compliance by RELUME internal QA process. A quality control tracking label including date of manufacture is mounted on the inside of the LED light engine panel.

All Relume LED products carry a 7 year warranty and are rated for 70,000 hours, or about 20 years for streetlight use. WattWorks is the exclusive Distributor for Ohio

Specification and Photometric - pdf - Click Here
Additional Information at Relume website - Click Here

LED Lighting and Infrastructure Project Wins APWA Award

OXFORD, Mich. -- Relume Technologies has partnered in a new street lighting and roadway reconstruction project in Pontiac, Mich., that won the Project of the Year Award from the Michigan Chapter of the American Public Works Association (APWA).
"... A recent Relume LED conversion in the city of Battle Creek, Michigan resulted in an 81 percent savings on annual electric costs and a savings of over $60,000 annually in materials, labor and maintenance. ..."
Relume Press Release - pdf- Click Here

LavaLux - Outdoor Area Lighting

Designed for a mounting height of 15 feet, these fixtures can be used for small parking lots and building-mounted security lighting. The optical section is sealed to minimize degradations due to water, dirt, and insect contamination. Pole or wall mountable.


LavaLux LL-70 Outdoor Area LED Fixture	LavaLux LL-140 Outdoor Area LED Fixture
This fixture provides illumination similar to a 90 watt metal halide fixture; and with its high-efficiency LUXEON® Rebel LEDs, and power supply, consumes 40% less power.	This fixture provides illumination similar to a 175 watt metal halide fixture; and with its high-efficiency LUXEON® Rebel LEDs, and power supply, consumes 40% less power.
Specification: Total Light Output: 3200 lumens Cool White (standard): 6500° K (typical) Input Voltage: 120/240 VAC Input Frequency: 50 or 60 Hertz Power Supply Safety: cUL/UL1310/1585 Class 2 Wet Locations Power Factor Correction Power Input: 70 watts Fixture Efficiency: 44 lumens / watt Est. Life 70% output at 50,000 hrs. Photocell Control Options: Colors: Cool White (standard), Neutral White, Warm White, Green, Cyan, Blue, Royal Blue, Red, Red-Orange, Amber 277 VAC 47 – 63 Hertz Custom Computer Interface	Specification: Total Light Output: 6400 lumens Cool White (standard): 6500° K (typical) Input Voltage: 120/240 VAC Input Frequency: 50 or 60 Hertz Power Supply Safety: cUL/UL1310/1585 Class 2 Wet Locations Power factor correction Power Input: 140 watts Fixture Efficiency: 44 lumens / watt Est. Life 70% output at 50,000 hrs. Photocell Control Options: Colors: Cool White (standard), Neutral White, Warm White, Green, Cyan, Blue, Royal Blue, Red, Red-Orange, Amber 277 VAC 47 – 63 Hertz Custom Computer Interface
LavaLux LL-70 Area/Streetlight Spec & Photometric - pdf - *Click Here*	LavaLux LL-140 Area/Streetlight Spec & Photometric - pdf - *Click Here*