There are no products in your shopping cart.
This install was done in the Hocking Hills region of Ohio, near Logan, Ohio. The system was configured to operate in Grid Zero mode. The system does not back feed the grid. Net metering is not practical with the local utility company.
3.9 KW Solar Array
4KW 240v AC Inverter
22KWh Battery Bank
Outback Radian inverters have the ability to operate in Grid Zero mode. This mode is for locations that do not allow back feeding the grid. The system powers the loads from batteries, until the set points are reached. The grid provides the first 1KW of power to the loads. If the batteries have reached their grid zero set point, the grid will provide all of the power to the loads. The batteries are recharged by the solar panels during the day.
1 Array 3.9 KW
12 x 325 watt solar panels
Ironridge roof flash foot and racking
Outback Radian Inverter Grid Zero Mode 4KW 240VAC
80 Amp Charge Controller
Outback Load Center with Circuit protection and connections
Mate 3 controller
Outback 3 tier battery bank
48 Volt 510AH battery bank
3 strings of 4 x 12v Outback 170RE Batteries